When To Hire An Industrial Electrician Over A Standard Electrical Contractor

Industrial Electrical VancouverAn Industrial Electrical Contractor covers many aspects of the trade. They focus on industrial installations, maintenance and trouble-shooting.

When you have a project that would be classified as an industrial installation, you ought to have none other than an Industrial Electrician do the job. You want a Licensed Electrician with an industrial background and knowledge.

An industrial installation may involve installing:

  • transformers
  • motor control centers
  • plc logic controllers
  • cable tray
  • teck cable
  • pipe and wire in rigid, emt and pvc
  • heat tracing
  • local and remote disconnect switches ,both fusible and non fusible
  • frequency drives
  • soft starters
  • wireways
  • splitters and more 

An industrial electrician may also need to create lighting layouts in regards to lighting needs, with the ability for servicing lights or accessibility.

You have to really look at how a job will all come together, and place your lighting so one can work on it in the future when lamps, ballasts or fixtures need changing out.

When working on an industrial site, there are many different types of devices that an Industrial Electrician has to deal with, that a standard electrical contractor would probably not be equipped to handle. These devices can be a simple limit switch or inductive and capacitive proximity sensors, various photo sensors, encoders, radar level sensors, ground fault system interrupters, and many more types and styles of sensing devices.

When building a plc panel it is very important to make sure that the cabinet will house the plc with all the cards dedicated to the cabinet. This will include wire way, terminals, identifiers, end stops, interposing relays, ground terminals, power supplies, fuse terminals, mini breakers, Ethernet cards and any other type of device that needs to be housed into this cabinet.

An Industrial Electrician knows it is always wise to try to oversize conduits, and use extra teck cable control conductors. This can be very beneficial in the future for additional equipment, especially on long runs to remote terminal boxes or processing areas. It saves a lot on labour and future materials if spare capacity can be built into the job. This is always a good practice, and helps out when in a pinch and extra wiring is needed. A professional Industrial Electrician is skilled at looking to the future and possible expansion requirements.

If new motor control centers need to be ordered, an experienced Industrial Electrician can identify what your actual needs are before ordering equipment, or rebuilding existing equipment.

An Industrial Electrician knows that it is wise to include overload-indicating lights in the doors of the starters. This helps the maintenance electrician when trouble-shooting, as it is very visual. Overload trip inputs can be wired back to the plc to give a trip indication. There can be hour meters, amp meter, volt meters, etc, in various starters, depending on the application.

It is this kind of ground work and detail that a professional, experienced Industrial Electrician will work out at the beginning of any project.

When faced with the choice of hiring an Industrial Electrician or a general electrical contractor, it is in your best interest to have professionals working on your project who are qualified, experienced and knowledgeable in industrial-type installations.

Commercial Electrical Contractor Vs. Standard Electrician

Installing or repairing equipment in a commercial business is not a simple task, especially when it deals with electrical systems. You have to make a choice between a commercial electrical contractor and a standard electrician, keeping in mind that you don’t want to put your commercial business at risk.

If you’re considering a standard electrician, first explore the advantages of hiring a commercial electrical contractor from a reliable service. You need to know the big difference between these two, and how your decision may affect your business.

commercial electrical contractor has a different area of expertise compared to a residential electrician. The electrical system in a commercial building is different from what you see in a residential house. Aside from the fact that there is a need for a higher voltage in a commercial system, this kind of equipment also requires additional power and flexibility which can be a complex requirement. It is just the same as saying that a restaurant’s coffee brewer is completely different from the one found at home.

Commercial buildings also have more complicated systems due to more equipment used in a business setting. That is why you need a commercial electrical contractor to set up, maintain and repair these systems in your business.

commercial electrical contractor also understands the pressure in dealing with a business. Commercial businesses are under so much pressure to be successful, and a commercial electrical contractor seems to understand those demands.

They know the importance of every machine that is needed to be repaired immediately in case of problems to avoid downtime as much as possible. The commercial electrical contractor is knowledgeable about how to do the required repairing with the very least impact on the function of the business. Standard electricians on the other hand don’t have enough knowledge in the commercial realm, and they don’t typically work on the systems of this type.

A commercial electrical contractor knows the difference between code for a business establishment and the code on a residential building, and the consequences of breaking said code. Commercial electricians are already familiar with these regulations.

A reliable electrical service has a commercial electrical contractor who has more than enough expertise and knowledge on how a commercial business runs, which is essential to every business, in order to function economically.

These are just some of the reasons not to put your business at risk by making a wise decision between a commercial electrical contractor and a standard electrician.

Hiring An Electrical Contractor For Residential Electrical Rewiring

Electrical contractorThe process of replacing electrical wiring in a house is called ‘electrical rewiring’. The said process is done by an electrical contractor.

Homeowners have their homes rewired for safety purposes to prevent danger caused by faulty wiring. When left unnoticed, faulty wiring will cause fire and other structural damage, especially to older properties. Getting your property rewired by a licensed electrical contractor who follows the latest technology and standards, offers peace of mind knowing that your electrical needs are properly addressed.

Electrical rewiring includes tasks such as providing additional electrical outlets for convenience, getting your features like electrical shock and fire protection through breaker panels and other modern safety devices. And each of these processes should only be done by a professional electrical contractor.

There are several reasons why you need an electrical contractor to do a rewiring in your home. Electrical rewiring is re-evaluated after about 30 years or sooner. If your home fails an electrical inspection, say for insurance requirements.

Tripping breakers, buzzing noises, overheating of electrical sockets and such require rewiring. Furthermore, you need an electrical contractor when your appliances at home are already flickering, constantly turning on and off, or not functioning in some areas of your home. Outdated and rubber-coated wiring should also be replaced by an electrical contractor.

Your home, even with a fine-looking facade and interior, still needs a whole-house rewiring process for your own safety, and for you to meet the local building code.

Many people may have different questions on how much an electrical rewiring cost. For instance, the cost of hiring a licensed electrical contractor, the electrical permit in order to do the said rewiring, cost of a new electrical panel if you need to install one, and the cost of materials to rewire a house.

Rewiring a house is indeed time-consuming. That’s why you need to hire a licensed electrical contractor with years of experience in residential electrical requirements. Make sure that the electrician you hire is properly insured & has WCB. Rewiring a home requires a financial investment, so be sure to hire the best person to do the whole process that is worthy of your investment.

A local electrical contractor is already familiar with the permitting processes in your area. An experienced, licensed electrical contractor knows when there is a need to get a permit, and what specific permits are needed. The cost of the said permit is the same whether you, the homeowner, or the electrician obtains it, yet a local electrician has more knowledge on what specific permits are necessary in your area.